摄像拍照单独录音循环录像AV输出移动电源功能电筒摄像机

照明:本设备⑸⑹⑺可由⑴键控制,每次按下⑴键，依次为⑸亮启-⑺亮启-⑹亮启-全灭。

注：以下所有操作均需在本设备正常识别到T-Flash卡的状态下进行。开机后如果绿灯快速闪烁，表示本设备未插入T-Flash卡或插入的T-Flash卡未能被本设备正确识别。

开机：短按⑵键开机进入待机状态，对应红灯亮启。

录像：待机状态下，短按⑵键一下开始录像，录像过程中，对应绿灯亮启，按⑵键一下停止录像并返回到待机状态，对应绿灯熄灭。

本设备录像片段时长可调，且支持循环存储录制文件。当内存卡满时，自动删除早期录制的文件，存储*新的文件。

注：本设备长时间录像时，随着电池的能量逐渐降低，尽量在录像的同时不要开启⑸处强光LED灯。

Video:In standby mode,short press key ⑵ then begin recording ,when recording ,the green light will light up : Short press key ⑵ the recording will stopped and came back standby state,the same time the green light will turns off.

The time of the video can be changeable,also it support cycle storage the recording file.When the memory card no memory,it will delete the former video and storage

the newest file.

Note:When the products in a long time recording ,the battery energy will be reducing ,so when recording the better is that not to open the key (5) led light.

拍照:待机状态下，短按⑶键一下拍照一张,对应绿灯闪烁一下后熄灭，表示拍照完成。拍照完成自动返回到待机状态。再次拍照只需重复以上操作即可。

录音：待机状态下，长按⑶键两秒开始录音，对应绿灯慢闪烁，录音过程中，长按⑶键两秒停止录音并返回到待机状态，对应绿灯熄灭。

Pictures: a short in the standby state of a press key (3) ,green light flashing a second and then turns off,that it has completed a camera.After the camera complete it will comes back standby state. Just do it as the same step if you want to take a camera again.

Audio :In standby state,short press key (3) two seconds then it begin recording while the greee light slow flashing, when recording ,short press key (3) two seconds the recording stop and come back to standby state while the green light turns off.

设置：开机后插入TV线，长按⑶键两秒即进入设置状态，设置状态下，长按⑶键两秒退出设置状态返回待机状态。

设置状态下可对以下选项进行设置：

以下所有设置按⑶键选择一级菜单，按⑵键确定，再按⑶键选择选项，按⑵键确定并退出二级菜单。

Setting : After boot, then insert TV line,long press key (3) two seconds the products into setting state, in the setting state,short press key (3) two seconds then exit setting state and come back standby state.

Set up under the condition of the following options for setting:

All above setting can press key (3) choose the menu，press key (2) to confirm,then press key (3) choose options, then press key (2) to confirm and exit second menu.

    1.      分辨率(Resolution)

      可设置640*480,1280*720。

1. Resolution: 640*480/1280*720(optional)

    2.      循环录影(Cyclic Record)

      可设置1分钟，2分钟，3分钟，5分钟,10分钟,

      15分钟和关闭。

2. Cyclic record:

1 minute,2 minutes,3 minutes ,5 minutes ,10 minutes ,15 minutes and turn off can be settiing.

3.      日期和时间(Date/Time):

      可设置年,月,日,时,分,秒。

      短按⑶键调节数字，长按⑶键确定。

3.Date/Time

Year/ Months/Day/ Hour/ Minutes/Seconds can be setting .

    4.      录音(Audio)：

      可设置录制的声音开和关。

4.Audio:

The sounds of the audio can be setting.

    5.      TV模式(TV Mode)

      可设置NTSC和PAL制。

5.TV Mode

NTSC　and PAL can be setting.

6.      语言设置(Language)

      可设置简体中文，繁体中文，英文等语言。

本设备也可通过时间设置文件更改系统时间,用电脑新建一个名为“timeset.txt”的文件，文件内容编写为当前年、月、日、时、分、秒，如：2012.12.02.11.35.18,保存文件并将该文件拷贝至本设备T-Flash卡根目录下,重新开机即可。

6.Language

Simplified Chinese,Traditional Chinese , English and other languages can be setting.

This products can also be through the time set file changing the system time, use your computer to create a file with the name "timeset.txt",Write the contents of the documents for the current year, month, day, time, minutes and seconds ,such as 2012.12.02.11.35.18, Save the file and the file copy to the product T - Flash directory, Then resart it.

回放：将随机配备的TV线与电视连接，通过USB供电，长按⑵键两秒进入回放模式。进入回放模式后，按⑶键向下选择文件，如果选择到视频文件或音频文件，按⑵键播放；播放过程中，按⑵键暂停播放。如果选择照片文件，按⑵键无任何反应。回放状态下，长按⑵键两秒退出回放状态返回待机状态。

Playback: Using the TV line to connect TV,thorugh USB it can be supply power,long press key (2) two seconds then it comes into playback mode,then press key (3) for choosing the file, if you choose video file or audio file, press key (2) to play, when playing,press key (2) to suspended. If you choose photos file,press key (2) without any reaction. When palyback state,long press key (2) two seconds,it will be exsit playback state and comes back to standby state. 

关机：待机状态下，长按⑵三秒，所有指示灯熄灭，表示设备正常关机。

Shutdown: in the standby state,long press key (2) three seconds,all lights will turns off, thus it shows the products shutdown.

移动磁盘：在本设备正常识别到T-Flash卡的情况下，用随机配备的USB连接线将本设备连接电脑，直至电脑正常识别到移动磁盘。

充电(无移动电源功能)：当红灯快速闪烁数次后自动熄灭，表示电池电量极低，请及时充电。充电请使用随机配备的充电器进行充电。充电时，红灯常亮表示正在充电，当绿灯亮启时，表示充电完成；充电完成后请及时拔除，防止长时间充电对电池的损坏。

Removable disk : need to connect the computer till it is readable in your computer. Charging( not mobile) when flash red light , pls charge with the charger .

when charging , the red light is red , turn green when it is full .pls remove the charger when it is full , to prevent damaging the battery .

充电(有移动电源功能)：用随机配备的USB线一端连接⒂处,另一端连接充电器即可为本设备充电,充电过程中，⒁处指示灯*个闪烁,表示电池电量较低；*个灯常亮，第2个灯闪烁，表示电池电量约25%；*和第2个灯常亮，第3个灯闪烁，表示电池电量约50%；

*、第2和第3个灯常亮,第4个灯闪烁，表示电池电量约75%；四个灯全部常亮，表示电池电量充满。充电完成后请及时拔除，防止长时间充电对电池的损坏。

 Charging ( mobile power function): use a tpye USB connection (15) when charging (14) at the indicator start to blink , it indicating the battery is running low : the first lit is bright , second lit start to blink indicating the battery is about 25% ;first and second light is lighted, the third light is blinking ,indicate the battery is about 75% ;All four light is lit , indicating the battery is full charged ,After charging the pls remove it to prevent damage to the battery .

放电(有移动电源功能)：用随机配备的USB线一端连接⒂处,另一端连接便携设备，⒁处指示灯*个至第4个灯依次闪烁，表示电池电量为满电；*个至第3个灯依次闪烁,表示电池电量约75%；*个和第2个灯依次闪烁， 表示电池电量约50%；仅*个灯闪烁，表示电池电量约25%。

Discharge (mobile power function) : Using a USB connection (15) to connecting portable devices (14) when 1 to 4 lights flashing in sequence ,indicating the battery is full . when 3 light flashing in sequence represnts 75% of battery power ; 1 and 2 lights flashing in sequence means about 50% charge :; 1 lit is flashes mean 25% of the battery power.

存放：请将本设备存放于阴凉干燥处，如果长时间不使用本设备，请将设备内锂电池取出单独存放。

 Storage：Please store the product in a cool , dry place, if not using for a long period ,

remove the battery from the item .